YES
✅ SPECTRA (teats only, not breast pump not compatible, sorry)
✅Chicco Benessere Well-Being
✅ PIGEON Soft touch
✅ MINBIE look a little odd but they fit well
✅New Begginings BABY
✅ NUK - First choice series
✅ Philips Avent - Anti-Kolik
⚠️Look for teats that have a 35mm inner diametre and 50mm total diametre.
NO
⛔PIGEON Perfect match
⛔NUK latex and NUK Nature sense (the base is too thick)
⛔ KLEEN KANTEEN
⛔TOMMEE TIPPIE
⛔COMITOMO
⛔Some AVENT teats fit on the bottle collar well, but can't be screwed back on to bottle as teat is too thick
⛔Doctor Browns
Something out of date here? Please let us know via 📧hello@lionandlady.com
The bottles are single walled and for good reason!
All you really want to do is ‘take any chill’ off the bottle. You need to bring it to body temperature and with the single wall, you can do this quickly and easily, by the standing the bottle in boiled water for 8 seconds.
The bottle has been specially designed to conduct heat far more effectively than plastic. Once it reaches its warmed temperature it will stay there longer also.
The stainless steel is the most effective conductor of heat - the bottle itself will be a great temperature gauge for its contents.
Too hot for baby to hold means too hot for baby to drink! The contents of the bottle should be body temperature. Hold the bottle to your wrist to test the temperature, or drop some contents from the bottle onto your wrist.
Yes food grade silcone - it is supplied with a medium flow (3m+) anti-colic teat for our 210ml bottles and (6m+) for our 350ml bottles.
The Collar is made from a PP plastic and has been tested to be BPA FREE.
This was a decision that we didn’t take lightly. It is a known design principle that a softer material (BPA free plastic) must screw onto a harder one (steel) in order to make it completely watertight. If we went steel on steel you would likely curse the level of leakage that occurs, and shy away from the bottle.
Yes - The lid is made from the same material as the collar and fits onto the bottle for the baby to hold. There are also measurements inside the lid to measure formula or water etc.
The bottle comes complete with the stainless steel bottle, collar, teat and lid (that fits onto bottle).The Storage Cap(to convert the bottle into a puree pot or storage container) is available as an extra accessory if required.
Our smallest bottle holds to 210ml to the neck. So you could fill water to 180ml then room for a formula scoop ontop.
Our larget bottle measures to 270ml and has a capacity of 350mls.
A microwave oven should not be used to thaw or heat formula or Expressed Breast Milk (EBM) as this can destroy some of the nutrients in breast milk. Be careful not to overheat or boil EBM also.
Our bottles can be sterilised by
- boiling,
- steam sterilising or
- UV sterilising.
Click to here view our video with step by step tips on how to sterilise our 210ml bottles.